[vc_row][vc_column][vc_column_text]Note: this is an old post. The updated post series from 2020 is LEAP’s 3-Part Series on “What y+ should I use in my simulations?”… Read More »Turbulence Part 3 – Selection of wall functions and Y+ to best capture the Turbulent Boundary Layer
The Reynolds number (Re) is the single most important non-dimensional number in fluid dynamics and is recommended to be calculated before you begin any new… Read More »How does the Reynolds Number affect my CFD model?
As part of the visit to Australia by Dr Florian Menter, world-recognised expert in turbulence modelling, LEAP Australia is pleased to announce a webinar to… Read More »Webinar: Recent Advancements in Turbulence Modelling with Dr. Florian Menter
[vc_row][vc_column][vc_column_text]Note: this is an old post. The updated post series from 2020 is LEAP’s 3-Part Series on “What y+ should I use in my simulations?”… Read More »Tips & Tricks: Turbulence Part 2 – Wall Functions and Y+ requirements
Dr. Menter is a world-recognised expert in turbulence modelling.
He developed the widely used Shear-Stress Transport (SST) turbulence model, which has set a milestone in the accurate prediction of aerodynamic flows. He has also contributed to the formulation of one-equation turbulence models, advanced near wall treatment of turbulence equations, transition modelling and unsteady flow models. He has been in charge of the turbulence modelling program at ANSYS for more than 15 years and has been involved in a wide range of industrial modelling challenges.
We will now focus on Turbulence Modelling, which is a critical area for any engineer involved with industrial CFD. There are a number of different… Read More »Tips & Tricks: Turbulence Part 1 – Introduction to Turbulence Modelling
The previous posts have discussed the meshing requirements that we need to pay attention to for a valid result. It is important to remember that… Read More »Tips & Tricks: Convergence and Mesh Independence Study
Welcome to the first in LEAP’s series of CFD Tips & Tricks blogs. The topics for this first series of blog entries will focus on the… Read More »Tips & Tricks: Global Meshing Controls in ANSYS
You may already know that Computational Fluid Dynamics (CFD) is currently used by all Formula One teams as part of their ongoing development for their… Read More »How the top Formula One (F1) teams stay on the podium
