[vc_row][vc_column][vc_column_text]Note: this is an old post. The updated post series from 2020 is LEAP’s 3-Part Series on “What y+ should I use in my simulations?”… Read More »Tips & Tricks: Turbulence Part 2 – Wall Functions and Y+ requirements
Dr. Menter is a world-recognised expert in turbulence modelling.
He developed the widely used Shear-Stress Transport (SST) turbulence model, which has set a milestone in the accurate prediction of aerodynamic flows. He has also contributed to the formulation of one-equation turbulence models, advanced near wall treatment of turbulence equations, transition modelling and unsteady flow models. He has been in charge of the turbulence modelling program at ANSYS for more than 15 years and has been involved in a wide range of industrial modelling challenges.
We will now focus on Turbulence Modelling, which is a critical area for any engineer involved with industrial CFD. There are a number of different… Read More »Tips & Tricks: Turbulence Part 1 – Introduction to Turbulence Modelling
The previous posts have discussed the meshing requirements that we need to pay attention to for a valid result. It is important to remember that… Read More »Tips & Tricks: Convergence and Mesh Independence Study
[vc_row][vc_column][vc_column_text] Throughout our first set of Tips & Tricks posts relating to meshing controls and meshing methods, we have made mention of Inflation Layers a number of… Read More »Tips & Tricks: Inflation Layer Meshing in ANSYS
For this post, we’ll discuss a topic which allows you to complement your understanding of global and local mesh controls that we have covered previously. Sweep meshing… Read More »Tips & Tricks: Sweep Meshing in ANSYS
In our previous post we discussed the importance of geometry preparation, utilising the ANSYS Global Mesh Control settings and the best use of the ANSYS Meshing… Read More »Tips & Tricks: Size Controls in ANSYS
Welcome to the first in LEAP’s series of CFD Tips & Tricks blogs. The topics for this first series of blog entries will focus on the… Read More »Tips & Tricks: Global Meshing Controls in ANSYS
You may already know that Computational Fluid Dynamics (CFD) is currently used by all Formula One teams as part of their ongoing development for their… Read More »How the top Formula One (F1) teams stay on the podium
